kernel.git/Documentation/devicetree/bindings/ata, branch linux-6.10.y

dt-bindings: ata: ahci-da850: Convert to dtschema

2024-04-02T07:24:57Z

Convert the ahci-da850 bindings to DT schema. Signed-off-by: Animesh Agarwal Reviewed-by: Conor Dooley Signed-off-by: Damien Le Moal

dt-bindings: ata: imx-pata: Convert to dtschema

2024-03-25T09:25:38Z

Convert the imx-pata bindings to DT schema. Add missing fsl,imx31-pata and fsl,imx51-pata compatibles during conversion, because they are already being used in existing DTS. Signed-off-by: Animesh Agarwal Reviewed-by: Krzysztof Kozlowski Signed-off-by: Damien Le Moal

Merge tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

2024-03-13T16:29:53Z

Pull ata updates from Niklas Cassel: - Do not enable LPM for external ports (hotplug-capable ports or eSATA ports), as the HBA will not be able to detect hot plug removal events when LPM is enabled (me) - Drop the board type board_ahci_low_power. Now when we make sure that we won't enable LPM for external ports, we can always set the LPM policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is thus no longer any need for the board type board_ahci_low_power, so it can be removed. (As before, LPM features not supported by the HBA and/or the device will not be enabled, regardless of the LPM policy Kconfig) (Mario Limonciello) Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0 (which will not try to enable any LPM features), however, most Linux distributions override this and set it to 3 (Medium power with DIPM). We intend to change the default to 3 in the coming cycles, but we will wait a cycle or two. - Add board type board_ahci_pcs_quirk and make all legacy Intel platforms use it. The Intel PCS quirk was being applied to basically all Intel platforms, which caused some issues (the device failing to come back after a reset), when being applied to newer Intel platforms where it shouldn't have been applied. New platforms can be added using board type board_ahci, which will not have the quirk applied (me) - Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more clearly highlight that it applies two different quirks (me) - Modify the ahci_broken_devslp() quirk to be implemented like all the other quirks (i.e. define a board type for the quirk) (me) - Drop unused board_ahci_noncq board type (me) - Rename board_ahci_nomsi to board_ahci_no_msi to match the other board types (me) - Make pata_parport_bus_type const (Ricardo B. Marliere) - Remove at91 compact flash device tree binding. (The binding is not used by any driver.) (from Hari Prasath Gujulan Elango) - Convert MediaTek device tree binding to json-schema (Rafał Miłecki) - At boot, print the number of implemented ports, instead of printing the maximum number of ports supported by the HBA silicon (me) * tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ahci: print the number of implemented ports dt-bindings: ata: convert MediaTek controller to the json-schema ahci: rename board_ahci_nomsi ahci: drop unused board_ahci_noncq ahci: clean up ahci_broken_devslp quirk ahci: rename board_ahci_nosntf ahci: clean up intel_pcs_quirk ata: ahci: Drop low power policy board type ata: ahci: do not enable LPM on external ports ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy() ata: ahci: a hotplug capable port is an external port ata: ahci: move marking of external port earlier dt-bindings: ata: atmel: remove at91 compact flash documentation ata: pata_parport: make pata_parport_bus_type const

dt-bindings: ata: convert MediaTek controller to the json-schema

2024-02-19T10:19:04Z

This helps validating DTS files. Signed-off-by: Rafał Miłecki Reviewed-by: Krzysztof Kozlowski Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Niklas Cassel

dt-bindings: ata: atmel: remove at91 compact flash documentation

2024-02-06T09:53:47Z

The compatible "at91rm9200-cf" is not used by any driver, hence remove the corresponding documentation. Signed-off-by: Hari Prasath Gujulan Elango Acked-by: Rob Herring Acked-by: Nicolas Ferre [cassel: add missing space in commit log] Signed-off-by: Niklas Cassel

dt-bindings: xilinx: replace Piyush Mehta maintainership

2024-01-31T13:42:38Z

As Piyush is leaving AMD, he handed over ahci-ceva, ZynqMP Mode Pin GPIO controller, Zynq UltraScale+ MPSoC and Versal reset, Xilinx SuperSpeed DWC3 USB SoC controller, Microchip USB5744 4-port Hub Controller and Xilinx udc controller maintainership duties to Mubin and Radhey. Signed-off-by: Radhey Shyam Pandey Acked-by: Mubin Sayyed Acked-by: Michal Simek Acked-by: Krzysztof Kozlowski Acked-by: Piyush Mehta Acked-by: Bartosz Golaszewski Acked-by: Niklas Cassel Link: https://lore.kernel.org/r/1705664181-722937-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Rob Herring

dt-bindings: ata: tegra: Disallow undefined properties

2023-10-17T23:07:30Z

Device specific bindings should not allow undefined properties. This is accomplished in json-schema with 'additionalProperties: false'. Signed-off-by: Rob Herring Acked-by: Conor Dooley Signed-off-by: Damien Le Moal

dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

2023-09-25T06:51:16Z

The PATA child node schema is missing constraints to prevent unknown properties. As none of the users of this common binding extend the child nodes with additional properties, adding "additionalProperties: false" here is sufficient. Signed-off-by: Rob Herring Acked-by: Conor Dooley Signed-off-by: Damien Le Moal

dt-bindings: Fix typos

2023-08-18T16:32:25Z

Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring

Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-06-30T18:48:16Z

Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...