kernel.git/Documentation/devicetree/bindings/ata, branch linux-4.5.y

ata: ahci-platform: Add ports-implemented DT bindings.

2016-05-11T09:21:37Z

commit 17dcc37e3e847bc0e67a5b1ec52471fcc6c18682 upstream. On some SOCs PORTS_IMPL register value is never programmed by the firmware and left at zero value. Which means that no sata ports are available for software. AHCI driver used to cope up with this by fabricating the port_map if the PORTS_IMPL register is read zero, but recent patch broke this workaround as zero value was valid for NVMe disks. This patch adds ports-implemented DT bindings as workaround for this issue in a way that DT can can override the PORTS_IMPL register in cases where the firmware did not program it already. Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Signed-off-by: Srinivas Kandagatla Acked-by: Tejun Heo Reviewed-by: Andy Gross Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ata: ahci_brcmstb: add support for MIPS-based platforms

2016-01-01T02:19:35Z

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware block for AHCI SATA3. This new compatible string, "brcm,bcm7425-ahci", may be used for most MIPS-based platforms of 40nm process technology. Signed-off-by: Jaedon Shin Tested-by: Florian Fainelli Acked-by: Brian Norris Signed-off-by: Tejun Heo

sata_rcar: Add compatible string for r8a7795

2015-11-20T20:48:55Z

R-Car H3 SoC has compatible SATA controller with R-Car Gen2 SoCs. Signed-off-by: Kouei Abe Signed-off-by: Yoshihiro Kaneko Signed-off-by: Tejun Heo Acked-by: Simon Horman

devicetree: bindings: Fixed a few typos

2015-10-31T00:52:15Z

There is a few typos in Freescale QorIQ AHCI bindings, This patch fixes them. Signed-off-by: Tang Yuantian Signed-off-by: Tejun Heo

ahci: qoriq: Rename LS2085A SoC support code to LS2080A

2015-10-31T00:52:15Z

Freescale is renaming the LS2085A SoC to LS2080A. This patch addresses the same. Signed-off-by: Tang Yuantian Signed-off-by: Tejun Heo

devicetree:bindings: add devicetree bindings for Freescale AHCI

2015-09-08T16:30:06Z

adds bindings for Freescale QorIQ AHCI SATA controller. Signed-off-by: Tang Yuantian Reviewed-by: Hans de Goede Signed-off-by: Tejun Heo

Revert "ahci: added support for Freescale AHCI sata"

2015-09-08T16:30:06Z

This reverts commit 5163fb62541e ("ahci: added support for Freescale AHCI sata") The reverted patch added Freescale QorIQ AHCI sata support to ahci_platform driver though, but it left SoC specific settings to uboot. It leads to QorIQ sata heavily depending on uboot. In order to removing the dependency we first revert the old patch and then will add a new driver for QorIQ SATA. Since there are no LS* platforms that have been upstreamed, So the revert would not break anything exists. Signed-off-by: Tang Yuantian Reviewed-by: Hans de Goede Signed-off-by: Tejun Heo

devicetree:bindings: add devicetree bindings for ceva ahci

2015-06-10T02:15:17Z

adds bindings for CEVA AHCI SATA controller. optional property broken-gen2 is useful incase of hardware speed limitation. Signed-off-by: Suneel Garapati Signed-off-by: Tejun Heo

ahci: added support for Freescale AHCI sata

2015-06-09T05:02:15Z

Freescale introduced QorIQ series SOCs, like ls1021 ls2085, with AHCI sata support. It complies with the serial ATA 3.0 specification and the AHCI 1.3 specification. Signed-off-by: Shaohui Xie Signed-off-by: Yuantian Tang Signed-off-by: Tejun Heo

Documentation: devicetree: add Broadcom SATA binding

2015-05-25T00:11:25Z

Signed-off-by: Brian Norris Signed-off-by: Tejun Heo