Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.13.y 2013-12-03T05:40:42Z 2013-12-03T05:40:42Z Chanwoo Choi 2013-10-23T01:44:50Z urn:sha1:1675088f8bc3f955e9bd31418a6b3319487f27bf This patch fix typo of property name from 'pullup-uV' to 'pullup-uv'. The ntc_thermistor.c use 'pullup-uv' when parsing dt data. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 2013-12-03T05:35:23Z Sricharan R 2013-11-08T10:38:48Z urn:sha1:f1e8e3811486b858bcc7190477bc6e4ea8f3488c The binding and support for omap5-mpu which has a cortex-a15 smp core, gic and integrated L2 cache has been existing for sometime. So Documenting the missing binding here. Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 2013-12-03T05:21:02Z Rob Herring 2013-11-08T02:58:16Z urn:sha1:f04bda90392b729fea9b0420b2a87aa6f2abfcd9 Add missing "arm,armv8-pmuv3" compatible property for ARMv8 PMU. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> 2013-11-18T22:50:17Z Linus Torvalds 2013-11-18T22:50:17Z urn:sha1:794e96e8ecc1eeff56f4ede168fd0b8f4c5a00b9 Pull EDAC updates from Borislav Petkov: "Following up on last week's discussion, here's my part of the EDAC pile, highlights in the signed tag. The last two patches have a date from just now because I've just applied them to the tree after Johannes sent them to me earlier. I decided to forward them now because they're trivial. There's a third one for MPC85xx which adds PCIe error interrupt support but since it is not so trivial and hasn't seen any linux-next time, I'm deferring it to 3.14 EDAC update highlights: - Support for Calxeda ECX-2000 memory controller, from Robert Richter - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob Herring and Robert Richter - New maintainer for Freescale's MPC85xx EDAC driver: Johannes Thumshirn" * tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac/85xx: Remove mpc85xx_pci_err_remove EDAC: Add edac-mpc85xx driver to MAINTAINERS edac, highbank: Moving error injection to sysfs for edac edac, highbank: Add MAINTAINERS entry edac: Unify reporting of device info for device, mc and pci edac, highbank: Improve and unify naming edac, highbank: Add Calxeda ECX-2000 support ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi edac, highbank: Fix interrupt setup of mem and l2 controller 2013-11-12T07:52:17Z Linus Torvalds 2013-11-12T07:52:17Z urn:sha1:10d0c9705e80bbd3d587c5fad24599aabaca6688 Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ... 2013-11-11T08:34:56Z Linus Torvalds 2013-11-11T08:34:56Z urn:sha1:f9efbce6334844c7f8b9b9459f6d7a6fbc2928e0 Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ... 2013-11-11T08:05:37Z Linus Torvalds 2013-11-11T08:05:37Z urn:sha1:53575aa99dc1584484b99c8173042d8370f6ed88 Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. In this case it's involved: - Some Davinci driver updates that has required corresponding platform code changes (gpio mostly) - CCI bindings and a few driver updates - Marvell mvebu patches for PCI MSI support (could have gone through the PCI tree for this release, but they were acked by Bjorn for 3.12 so we kept them through arm-soc). - Marvell dove switch-over to DT-based PCIe configuration - Misc updates for Samsung platform dmaengine drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller ARM: S3C24XX: Fix possible dma selection warning PCI: mvebu: make local functions static PCI: mvebu: add I/O access wrappers PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug ARM: mvebu: fix gated clock documentation ARM: dove: remove legacy pcie and clock init ARM: dove: switch to DT probed mbus address windows ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 dmaengine: add driver for Samsung s3c24xx SoCs ARM: S3C24XX: number the dma clocks PCI: mvebu: add support for Marvell Dove SoCs PCI: mvebu: add support for reset on GPIO PCI: mvebu: remove subsys_initcall PCI: mvebu: increment nports only for registered ports PCI: mvebu: move clock enable before register access PCI: mvebu: add support for MSI irqchip: armada-370-xp: implement MSI support ... 2013-11-11T07:49:45Z Linus Torvalds 2013-11-11T07:49:45Z urn:sha1:aac59e3efce3dca787b11e34726001603ce3d161 Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ... 2013-11-04T23:01:05Z Rob Herring 2013-07-23T19:04:44Z urn:sha1:982ac2a7b757708845df4339243a91ba180a5744 The DDR controller is slightly different in ECX-2000 and ECX-1000, so we need to have different nodes for each platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [Device Tree documentation updated.] Signed-off-by: Robert Richter <rric@kernel.org> 2013-10-28T21:47:50Z Olof Johansson 2013-10-28T21:47:50Z urn:sha1:5f55c317e4a8cd5c0a70a896886914e1b09d8bd7 Some more dts changes from Benoit Cousson <bcousson@baylibre.com> via Tony Lindgren: - Add a lot of N900 nodes - Add OPP table to OMAP5/DRA7 - Add support for Newflow NanoBone board - Add i2c aliases - Add McASP and audio support - Add reset/idle on init bindings for OMAP - Add more nodes for AM4272 * tag 'omap-for-v3.13/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits) ARM: dts: omap5-uevm: Remove pinmux for dmic pins ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux ARM: dts: TWL4030: Add power button support ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add TLV320AIC3X support ARM: dts: omap3-n900:: Mux RX51_LCD_RESET_GPIO in DTS ARM: dts: omap3-n900: Add NAND support ARM: dts: omap3-n900: Specify regulator info ARM: dts: TWL4030: Add missing regulators ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add vibrator device ARM: dts: omap3-n900: GPIO key definitions ARM: dts: omap3-n900: Add support for SD cards ARM: dts: omap3-n900: Add UART support ARM: dts: omap3-n900: Fix i2c bus speed ARM: dts: omap3-n900: Add pinctrl for i2c devices ARM: dts: DRA7: Add CPU OPP table ARM: dts: OMAP5: Add CPU OPP table ARM: dts: dra7-evm: add smps123 supply for CPU ARM: dts: omap5-uevm: add smps123 supply for CPU ... Signed-off-by: Olof Johansson <olof@lixom.net>