kernel.git/Documentation/PCI, branch master

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-02-12T03:31:52Z

Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ...

Merge branch 'pci/misc'

2026-02-06T23:09:53Z

- Fix documentation typos (Shawn Lin) - Add struct p2pdma_provider kernel doc (Leon Romanovsky) - Remove useless devres WARN_ON() (Philipp Stanner) * pci/misc: PCI: Remove useless WARN_ON() from devres PCI/P2PDMA: Add missing struct p2pdma_provider documentation Documentation: PCI: Fix typos in msi-howto.rst

Merge branch 'pci/controller/dwc'

2026-02-06T23:09:34Z

- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a pointer to the preceding Capability (Qiang Yu) - Add dw_pcie_remove_capability() and dw_pcie_remove_ext_capability() to remove Capabilities that are advertised but not fully implemented (Qiang Yu) - Remove MSI and MSI-X Capabilities for DWC controllers in platforms that can't support them, so we automatically fall back to INTx (Qiang Yu) - Remove MSI-X and DPC Capabilities for Qualcomm platforms that advertise but don't support them (Qiang Yu) - Remove duplicate dw_pcie_ep_hide_ext_capability() function and replace with dw_pcie_remove_ext_capability() (Qiang Yu) - Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for drivers that support this (Shawn Lin) - Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up to avoid an unnecessary timeout (Manivannan Sadhasivam) - Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to trigger enumeration instead of waiting for link to be up because the PCI core doesn't allocate bus number space for hierarchies that might be attached (Niklas Cassel) - Make endpoint iATU entry for MSI permanent instead of programming it dynamically, which is slow and racy with respect to other concurrent traffic, e.g., eDMA (Koichiro Den) - Use iMSI-RX MSI target address when possible to fix endpoints using 32-bit MSI (Shawn Lin) - Make dw_pcie_ltssm_status_string() available and use it for logging errors in dw_pcie_wait_for_link() (Manivannan Sadhasivam) - Return -ENODEV when dw_pcie_wait_for_link() finds no devices, -EIO for device present but inactive, -ETIMEDOUT for other failures, so callers can handle these cases differently (Manivannan Sadhasivam) - Allow DWC host controller driver probe to continue if device is not found or found but inactive; only fail when there's an error with the link (Manivannan Sadhasivam) - For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are not accessible after PME_Turn_Off, simply wait 10ms instead of polling for L2/L3 Ready (Richard Zhu) - Use multiple iATU entries to map large bridge windows and DMA ranges when necessary instead of failing (Samuel Holland) - Rename struct dw_pcie_rp.has_msi_ctrl to .use_imsi_rx for clarity (Qiang Yu) - Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that can update BAR inbound address translation without requiring EPF driver to clear/reset the BAR first, and advertise it for DWC-based Endpoints (Koichiro Den) - Add EPC subrange_mapping feature bit for Endpoint Controllers that can map multiple independent inbound regions in a single BAR, implement subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint selftests for it (Koichiro Den) - Allow overriding default BAR sizes for pci-epf-test (Niklas Cassel) - Make resizable BARs work for Endpoint multi-PF configurations; previously it only worked for PF 0 (Aksh Garg) - Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and Address Match Mode (Aksh Garg) - Fix issues with outbound iATU index assignment that caused iATU index to be out of bounds (Niklas Cassel) - Clean up iATU index tracking to be consistent (Niklas Cassel) - Set up iATU when ECAM is enabled; previously IO and MEM outbound windows weren't programmed, and ECAM-related iATU entries weren't restored after suspend/resume, so config accesses failed (Krishna Chaitanya Chundru) * pci/controller/dwc: PCI: dwc: Fix missing iATU setup when ECAM is enabled PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup() PCI: dwc: Fix msg_atu_index assignment PCI: dwc: ep: Add comment explaining controller level PTM access in multi PF setup PCI: dwc: ep: Add per-PF BAR and inbound ATU mapping support PCI: dwc: ep: Fix resizable BAR support for multi-PF configurations PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes selftests: pci_endpoint: Add BAR subrange mapping test case misc: pci_endpoint_test: Add BAR subrange mapping test case PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support Documentation: PCI: endpoint: Clarify pci_epc_set_bar() usage PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU PCI: dwc: Advertise dynamic inbound mapping support PCI: endpoint: Add BAR subrange mapping support PCI: endpoint: Add dynamic_inbound_mapping EPC feature PCI: dwc: Rename dw_pcie_rp::has_msi_ctrl to dw_pcie_rp::use_imsi_rx for clarity PCI: dwc: Fix grammar and formatting for comment in dw_pcie_remove_ext_capability() PCI: dwc: Use multiple iATU windows for mapping large bridge windows and DMA ranges PCI: dwc: Remove duplicate dw_pcie_ep_hide_ext_capability() function PCI: dwc: Skip waiting for L2/L3 Ready if dw_pcie_rp::skip_l23_wait is true PCI: dwc: Fail dw_pcie_host_init() if dw_pcie_wait_for_link() returns -ETIMEDOUT PCI: dwc: Rework the error print of dw_pcie_wait_for_link() PCI: dwc: Rename and move ltssm_status_string() to pcie-designware.c PCI: dwc: Return -EIO from dw_pcie_wait_for_link() if device is not active PCI: dwc: Return -ENODEV from dw_pcie_wait_for_link() if device is not found PCI: dwc: Use cfg0_base as iMSI-RX target address to support 32-bit MSI devices PCI: dwc: ep: Cache MSI outbound iATU mapping Revert "PCI: dwc: Don't wait for link up if driver can detect Link Up event" Revert "PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt" Revert "PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported" Revert "PCI: qcom: Don't wait for link if we can detect Link Up" Revert "PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ" Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up" PCI: dwc: Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up PCI: dw-rockchip: Change get_ltssm() to provide L1 Substates info PCI: dwc: Add L1 Substates context to ltssm_status of debugfs PCI: qcom: Remove DPC Extended Capability PCI: qcom: Remove MSI-X Capability for Root Ports PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller PCI: dwc: Add new APIs to remove standard and extended Capability PCI: Add preceding capability position support in PCI_FIND_NEXT_*_CAP macros

PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes

2026-01-30T17:17:09Z

Add bar{0,1,2,3,4,5}_size attributes in configfs, so that the user is not restricted to run pci-epf-test with the hardcoded BAR size values defined in pci-epf-test.c. This code is shamelessly more or less copy pasted from pci-epf-vntb.c Signed-off-by: Niklas Cassel Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Koichiro Den Reviewed-by: Damien Le Moal Reviewed-by: Frank Li Link: https://patch.msgid.link/20260130113038.2143947-2-cassel@kernel.org

Documentation: PCI: endpoint: Clarify pci_epc_set_bar() usage

2026-01-29T23:42:14Z

The current documentation implies that pci_epc_set_bar() is only used before the host enumerates the endpoint. In practice, some Endpoint Controllers support calling pci_epc_set_bar() multiple times for the same BAR (without clearing it) in order to update inbound address translations after the host has programmed the BAR base address, which some Endpoint Functions such as vNTB already rely on. Add document text for that. Also document the expected call flow for BAR subrange mapping (pci_epf_bar.num_submap / pci_epf_bar.submap), which may require a second pci_epc_set_bar() call after the host has programmed the BAR base address. Signed-off-by: Koichiro Den Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Niklas Cassel Reviewed-by: Frank Li Link: https://patch.msgid.link/20260124145012.2794108-6-den@valinux.co.jp

net: ethernet: neterion: s2io: remove unused driver

2026-01-29T04:08:07Z

The s2io driver supports Exar (formerly Neterion and S2io) PCI-X 10 Gigabit Ethernet cards. Hardware supporting PCI-X has not been manufactured in years. On x86, it was quickly replaced by PCIe. While it stuck around longer on POWER hardware, the last POWER hardware to support it was POWER7, which is not supported by ppc64le Linux distributions. The last supported mainstream ppc64 Linux distribution was RHEL 7; while it is still supported under ELS, ELS is only available for x86 and IBM Z. It is possible to use many PCI-X cards in standard PCI slots (which are still available on new motherboards), but it does not make sense to do so for 10 Gigabit Ethernet because the maximum bandwidth of standard PCI is only 1067 Mbps. It is therefore highly unlikely that this driver is still being used. Remove the driver, and move the former maintainer to the CREDITS file (restoring credit for the vxge driver, which was removed in commit f05643a0f60b ("eth: remove neterion/vxge"). Signed-off-by: Ethan Nelson-Moore Link: https://patch.msgid.link/20260126031352.22997-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski

Documentation: PCI: Fix typos in msi-howto.rst

2025-12-29T17:22:08Z

Fix subject-verb agreement for "has a requirements" as well as "neither...or" conjunction mistake. And convert "Message Signalled Interrupts" to "Message Signaled Interrupts" to match the PCIe spec. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Tested-by: Randy Dunlap Reviewed-by: Randy Dunlap Reviewed-by: Bagas Sanjaya Link: https://patch.msgid.link/1766713528-173281-1-git-send-email-shawn.lin@rock-chips.com

Documentation: PCI: endpoint: Fix ntb/vntb copy & paste errors

2025-12-23T22:03:40Z

Fix copy & paste errors by changing the references from 'ntb' to 'vntb'. Fixes: 4ac8c8e52cd9 ("Documentation: PCI: Add specification for the PCI vNTB function device") Signed-off-by: Baruch Siach [mani: squashed the patches and fixed more errors] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Frank Li Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il

Documentation: PCI: Amend error recovery doc with pci_save_state() rules

2025-11-24T22:59:10Z

After recovering from a PCI error through reset, affected devices are in D0_uninitialized state and need to be brought into D0_active state by re-initializing their Config Space registers (PCIe r7.0 sec 5.3.1.1). To facilitate that, the PCI core provides pci_restore_state() and pci_save_state() helpers. Document rules governing their usage. As Bjorn notes, so far no file in "Documentation/ includes anything about the idea of a driver using pci_save_state() to capture the state it wants to restore after an error", even though it is a common pattern in drivers. So that's obviously a gap that should be closed. Reported-by: Bjorn Helgaas Closes: https://lore.kernel.org/r/20251113161556.GA2284238@bhelgaas/ Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki (Intel) Link: https://patch.msgid.link/077596ba70202be0e43fdad3bb9b93d356cbe4ec.1763746079.git.lukas@wunner.de

Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-10-06T17:41:03Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: - Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Power management: - If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver. This avoids annoying "Unable to change power state from D3cold to D0" messages (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files. This prevents using invalid data (~0) in drivers or lspci and, depending on how the PCIe controller reports errors, may avoid error interrupts or crashes (Brian Norris) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) AMD MDB PCIe controller driver: - Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for PERST# being described in a Root Port stanza, falling back to the host bridge if not found there (Sai Krishna Musham) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) STMicroelectronics STM32MP25 PCIe controller driver: - Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" * tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits) PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 PCI: xilinx-nwl: Fix ECAM programming PCI: j721e: Fix incorrect error message in probe() PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller PCI: dwc: Support 16-lane operation PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0() PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock PCI: rcar-gen4: Fix inverted break condition in PHY initialization PCI: rcar-gen4: Assure reset occurs before DBI access PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion PCI: Set up bridge resources earlier PCI: rcar-host: Drop PMSR spinlock ...