kernel.git/Documentation/DocBook/media/dvb, branch linux-3.6.y

[media] DVB: remove "stats" property bits from ATSC-MH API property additions

2012-05-20T13:06:08Z

Mauro is proposing a new API to handle statistics. This functionality will be returned after the statistics API is ready. Just remove them for now. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab

[media] DocBook: document new DTV Properties for ATSC-MH delivery system

2012-05-20T12:42:27Z

Document the following properties for controlling an ATSC-MH frontend: DTV_ATSCMH_FIC_VER - Version number of the FIC signaling data DTV_ATSCMH_PARADE_ID - Parade identification number DTV_ATSCMH_NOG - Number of MH groups per MH subframe for a designated parade DTV_ATSCMH_TNOG - Total number of MH groups in all parades in one subframe DTV_ATSCMH_SGN - Start group number DTV_ATSCMH_PRC - Parade repetition cycle DTV_ATSCMH_RS_FRAME_MODE - RS frame mode DTV_ATSCMH_RS_FRAME_ENSEMBLE - RS frame ensemble DTV_ATSCMH_RS_CODE_MODE_PRI - RS code mode (primary) DTV_ATSCMH_RS_CODE_MODE_SEC - RS code mode (secondary) DTV_ATSCMH_SCCC_BLOCK_MODE - Series Concatenated Convolutional Code Block Mode DTV_ATSCMH_SCCC_CODE_MODE_A - Series Concatenated Convolutional Code Rate A DTV_ATSCMH_SCCC_CODE_MODE_B - Series Concatenated Convolutional Code Rate B DTV_ATSCMH_SCCC_CODE_MODE_C - Series Concatenated Convolutional Code Rate C DTV_ATSCMH_SCCC_CODE_MODE_D - Series Concatenated Convolutional Code Rate D DTV_ATSCMH_FIC_ERR - FIC error count DTV_ATSCMH_CRC_ERR - CRC error count DTV_ATSCMH_RS_ERR - RS error count Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab

[media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T

2012-01-17T12:00:41Z

On ISDB-T, each layer can have its own independent modulation, applied to the carriers that belong to the segments associated with them. So, there's no sense to define a global modulation parameter. Signed-off-by: Mauro Carvalho Chehab

[media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters

2012-01-17T11:49:28Z

The ISDB-T differs on its way to implement the hierarchical transmissions: instead of using a low-priority/high-priority FEC codes, it does that by using different layers, each layer with their groups of segments. So, those parameters don't make sense for ISDB-T. Signed-off-by: Mauro Carvalho Chehab

[media] DocBook/dvbproperty.xml: Fix the units for DTV_FREQUENCY

2012-01-17T11:45:48Z

The units for DTV_FREQUENCY are kHz for satellital delivery systems (DVB-S/DVB-S2/DVB-TURBO/ISDB-S). Fix it at the API spec. Signed-off-by: Mauro Carvalho Chehab

[media] dvb: deprecate the usage of ops->info.type

2012-01-04T19:30:20Z

Mark info.type as deprecated inside the header, recommending the usage of DTV_ENUM_DELSYS DVBv5 command instead. Signed-off-by: Mauro Carvalho Chehab

[media] Update documentation to reflect DVB-C Annex A/C support

2011-12-20T13:50:08Z

Instead of using the same delivery system for both Annex A and Annex C, split them into two separate ones. This helps to support devices that only support Annex A. Signed-off-by: Mauro Carvalho Chehab

[media] DVB: Docbook update for DTV_ENUM_DELSYS

2011-12-12T17:03:49Z

Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab

[media] dvb: Allow select between DVB-C Annex A and Annex C

2011-11-11T14:46:23Z

DVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between Annex A and Annex C is that Annex C uses a subset of the modulation types, and uses a different rolloff factor. A different rolloff means that the bandwidth required is slicely different, and may affect the saw filter configuration at the tuners. Also, some demods have different configurations, depending on using Annex A or Annex C. So, allow userspace to specify it, by changing the rolloff factor. Signed-off-by: Mauro Carvalho Chehab

[media] DVB: Change API version in documentation: 3 -> 5.4

2011-09-03T21:07:23Z

Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab