kernel.git/Documentation/ABI/stable, branch linux-5.5.y

Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces

2020-01-13T19:04:33Z

Add missed "cpld4_version" attribute. Fixes: 52675da1d087 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces") Signed-off-by: Vadim Pasternak Signed-off-by: Andy Shevchenko

Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces

2020-01-13T19:04:33Z

Fix attribute name from "jtag_enable", which described twice to "cpld3_version", which is expected to be instead of second appearance of "jtag_enable". Fixes: 2752e34442b5 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces") Signed-off-by: Vadim Pasternak Signed-off-by: Andy Shevchenko

Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2019-12-03T22:09:14Z

Pull tty/serial updates from Greg KH: "Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit later in the merge window than normal as I wanted to make sure some last-minute patches applied to it were all sane. They seem to be :) There's a lot of little stuff in here, for the tty core, and for lots of serial drivers: - reverts of uartlite serial driver patches that were wrong - msm-serial driver fixes - serial core updates and fixes - tty core fixes - serial driver dma mapping api changes - lots of other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" vcs: prevent write access to vcsu devices tty: vt: keyboard: reject invalid keycodes tty: don't crash in tty_init_dev when missing tty_port serial: stm32: fix clearing interrupt error flags tty: Fix Kconfig indentation, continued serial: serial_core: Perform NULL checks for break_ctl ops tty: remove unused argument from tty_open_by_driver() tty: Fix Kconfig indentation {tty: serial, nand: onenand}: samsung: rename to fix build warning serial: ifx6x60: add missed pm_runtime_disable serial: pl011: Fix DMA ->flush_buffer() Revert "serial-uartlite: Move the uart register" Revert "serial-uartlite: Add get serial id if not provided" Revert "serial-uartlite: Do not use static struct uart_driver out of probe()" Revert "serial-uartlite: Add runtime support" Revert "serial-uartlite: Change logic how console_port is setup" Revert "serial-uartlite: Use allocated structure instead of static ones" tty: serial: msm_serial: Use dma_request_chan() directly for channel request tty: serial: tegra: Use dma_request_chan() directly for channel request ...

RDMA/srp: Add parse function for maximum initiator to target IU size

2019-10-08T18:17:32Z

According to SRP specifications 'srp-r16a' and 'srp2r06', IOControllerProfile attributes for SRP target port include the maximum initiator to target IU size. SRP connection daemons, such as srp_daemon, can get the value from the subnet manager. The SRP connection daemon can pass this value to kernel. This patch adds a parse function for it. Upstream commit [1] enables the kernel parameter, 'use_imm_data', by default. [1] also use (8 * 1024) as the default value for kernel parameter 'max_imm_data'. With those default values, the maximum initiator to target IU size will be 8260. In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module, do not support SRP-2 'immediate data' feature, the default maximum initiator to target IU size is significantly smaller than 8260. For 'ib_srpt.ko' module, which built from source before [2], the default maximum initiator to target IU is 2116. [1] introduces a regression issue for old srp targets with default kernel parameters, as the connection will be rejected because of a too large maximum initiator to target IU size. [1] commit 882981f4a411 ("RDMA/srp: Add support for immediate data") [2] commit 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data") Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com Reviewed-by: Bart Van Assche Signed-off-by: Honggang Li Signed-off-by: Jason Gunthorpe

RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel

2019-10-04T18:08:59Z

Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has reached EOL. Link: https://lore.kernel.org/r/20190930074252.20133-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja Signed-off-by: Jason Gunthorpe

drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable

2019-10-04T13:05:20Z

Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via sysfs. This setting need to be changed on specific host platforms depending on the selected host interface (LPC / eSPI). The setting is configurable via sysfs rather than device-tree to stay in line with other related configurable settings. On AST2500 the VUART SIRQ polarity can be auto-configured by reading a bit from a configuration register, e.g. the LPC/eSPI interface configuration bit. Tested: Verified on TYAN S7106 mainboard. Signed-off-by: Oskar Senft Link: https://lore.kernel.org/r/20190905144130.220713-1-osk@google.com Signed-off-by: Greg Kroah-Hartman

docs: w1: convert to ReST and add to the kAPI group of docs

2019-07-31T20:16:17Z

The 1wire documentation was written with w1 developers in mind, so, it makes sense to add it together with the driver-api set. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet

Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2019-07-16T19:21:41Z

Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2019-07-16T03:38:15Z

Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...

docs: driver-api: add a series of orphaned documents

2019-07-15T14:03:02Z

There are lots of documents under Documentation/*.txt and a few other orphan documents elsehwere that belong to the driver-API book. Move them to their right place. Reviewed-by: Cornelia Huck # vfio-related parts Acked-by: Logan Gunthorpe # switchtec Signed-off-by: Mauro Carvalho Chehab